
Product specifications
Table 1. SFP-10G-T-X cabling specifications
Cisco PIDs | Speeds | Cable Type | Distance | Max. Power Consumption (W) |
SFP-10G-T-X | 10Gbps | Cat6A/Cat7 or better | Up to 30 meters | 2.5W |
SFP-10G-T-X | 100M/1Gbps | Cat5e/Cat6A/Cat7 or better | Up to 100 meters | 1.0W |
provides cabling specifications for the SFP+ modules.
Table 2. SFP+ port cabling specifications
SFP+ | Wavelength (nm) | Cable Type | Core Size (Microns) | Modal Bandwidth (MHz*km)*3 | Cable Distance*1 |
SFP-10G-SR-Sa SFP-10G-SR SFP-10G-SR-X SFP-10G-SR-Ia | 850 | MMF | 62.5 62.5 50.0 50.0 50.0 50.0 50.0 | 160 (FDDI) 200 (OM1) 400 500 (OM2) 2000 (OM3) 4700 (OM4) 4700 (OM5) | 26m 33m 66m 82m 300m 400m 400m |
SFP-10G-LRM | 1310 | MMF SMF | 62.5 50.0 50.0 G.652 | 500 400 500 - | 220m 100m 220m 300m |
FET-10G | 850 | MMF | 50.0 50.0 50.0 50.0 | 500 (OM2) 2000 (OM3) 4700 (OM4) 4700 (OM5) | 25m 100m 100m 100m |
SFP-10G-LR-Sa SFP-10G-LR SFP-10G-LR-X SFP-10G-LR10-Ib | 1310 | SMF | G.652 | - | 10km |
SFP-10G-BXD-I | 1330 | SMF | G.652 | - | 10kmb |
SFP-10G-BXU-I | 1270 | SMF | G.652 | - | 10kmb |
SFP-10G-ER-S*4a SFP-10G-ER*4 SFP-10G-ER-I*4 | 1550 | SMF | G.652 | - | 40km*2 |
SFP-10G-BX40D-I*6 | 1330 | SMF | G.652 | - | 40km |
SFP-10G-BX40U-I*6 | 1270 | SMF | G.652 | - | 40km |
SFP-10G-ZR-S*5a SFP-10G-ZR*5 | 1550 | SMF | G.652 | - | 80km |
SFP-10G-ZR-I*5a | 1550 | SMF | G.652 | - | 70km |
SFP-H10GB-CU1M | - | Twinax cable, passive, 30AWG cable assembly | - | - | 1m |
SFP-H10GB-CU1-5M | - | Twinax cable, passive, 30AWG cable assembly | - | - | 1.5m |
SFP-H10GB-CU2M | - | Twinax cable, passive, 30AWG cable assembly | - | - | 2m |
SFP-H10GB-CU2-5M | - | Twinax cable, passive, 30AWG cable assembly | - | - | 2.5m |
SFP-H10GB-CU3M | - | Twinax cable, passive, 30AWG cable assembly | - | - | 3m |
SFP-H10GB-CU4M | - | Twinax cable, passive, 24AWG or 26AWG cable assembly | - | - | 4m |
SFP-H10GB-CU5M | - | Twinax cable, passive, 24AWG or 26AWG cable assembly | - | - | 5m |
SFP-H10GB-ACU7M | - | Twinax cable, active, 30 AWG cable assembly | - | - | 7m |
SFP-H10GB-ACU10M | - | Twinax cable, active, 28 AWG cable assembly | - | - | 10m |
SFP-10G-AOC1M | - | Active Optical Cable assembly | - | - | 1m |
SFP-10G-AOC2M | - | Active Optical Cable assembly | - | - | 2m |
SFP-10G-AOC3M | - | Active Optical Cable assembly | - | - | 3m |
SFP-10G-AOC5M | - | Active Optical Cable assembly | - | - | 5m |
SFP-10G-AOC7M | - | Active Optical Cable assembly | - | - | 7m |
SFP-10G-AOC10M | - | Active Optical Cable assembly | - | - | 10m |
Table 3. Optical transmit and receive specifications
Product | Type | Transmit Power (dBm)* | Receive Power (dBm)* | Transmit and Receive Wavelength (nm) |
Maximum | Minimum | Maximum | Minimum |
SFP-10G-SR-S SFP-10G-SR | 10GBASE-SR 850nm MMF | -1.2** | -7.3 | -1.0 | -9.9 | 840 to 860 |
SFP-10G-SR-X SFP-10G-SR-I | 10GBASE-SR, 10GBASE-SW and OTU2e 850nm MMF | -1.2** | -7.3 | -1.0 | -9.9 | 840 to 860 |
SFP-10G-LRM | 10GBASE-LRM 1310nm MMF and SMF | 0.5 | -6.5 | 0.5 | -8.4 (in average) and -6.4 (in OMA)*** | 1260 to 1355 |
FET-10G | FET-10G 850nm MMF | -1.3 | -8 | -1 | -9.9 | 840 to 860 |
SFP-10G-LR-S SFP-10G-LR | 10GBASE-LR 1310nm SMF | 0.5 | -8.2 | 0.5 | -14.4 | 1260 to 1355 |
SFP-10G-LR-X | 10GBASE-LR, 10GBASE-LW and OTU2e 1310nm SMF | 0.5 | -8.2 | 0.5 | -14.4 | 1260 to 1355 |
SFP-10G-LR10-I | 10GBASE-LR, CPRI 1310 SMF | 0.5 | -8.2 | 0.5 | -14.4 | 1260 to 1355 |
SFP-10G-BXD-I | 10G-SFP Bidirectional for 10km | 0.5 | -8.2 | 0.5 | -14.4 | 1320 to 1340 (Tx) 1260 to 1280 (Rx) |
SFP-10G-BXU-I | 10G-SFP Bidirectional for 10km | 0.5 | -8.2 | 0.5 | -14.4 | 1260 to 1280 (Tx) 1320 to 1340 (Rx) |
SFP-10G-ER-S SFP-10G-ER SFP-10G-ER-I | 10GBASE-ER 1550nm SMF | 4.0 | -4.7 | -1 | -15.8 | 1530 to 1565 |
SFP-10G-BX40D-I | 10G-SFP Bidirectional for 40km | 4.5 | -2.7 | -9 | -21.2 | 1320 to 1340 (Tx) 1260 to 1280 (Rx) |
SFP-10G-BX40U-I | 10G-SFP Bidirectional for 40km | 4.5 | -2.7 | -9 | -21.2 | 1260 to 1280 (Tx) 1320 to 1340 (Rx) |
SFP-10G-ZR-S SFP-10G-ZR SFP-10G-ZR-I | 10GBASE-ZR 1550nm SMF | 4.0 | 0 | -7 | -24 | 1530 to 1565 |
Table 4. SFP-10G-ZR, SFP-10G-ZR-S optical parameters
Parameter | Symbol | Minimum | Typical | Maximum | Units | Notes and Conditions |
Transmitter |
Transmitter wavelength |
| 1530 |
| 1565 | nm |
|
Side-mode suppression ratio | SMSR | 30 |
|
| dB |
|
Transmitter extinction ratio |
| 9 |
|
| dB |
|
Transmitter optical output power | Pout | 0 |
| 4.0 | dBm | Average power coupled into single-mode fiber |
Receiver |
Receiver optical input wavelength |
| 1260 |
| 1565 | nm | Receiver Sensitivity specified over 1530-1565nm only, with 3dB degradation permitted from 1260-1530nm |
Receiver damage threshold |
| +5 |
|
| dBm |
|
Receiver Overload |
| -7 |
|
| dBm |
|
Receiver performance at 10GE LAN and 10GE WAN rates, non-FEC application |
Receiver sensitivity |
| -24 |
|
| dBm | At BER=1E-12 with PRBS31 and 10GE frame |
Chromatic Dispersion Penalty@ 1600 ps/nm* |
|
|
| 3 | dB |
|
Receiver performance at OTU2/OTU2e rates, FEC application |
Receiver sensitivity |
| -27 |
|
| dBm | At Pre-FEC BER=1E-5 for GFEC and Pre-FEC BER=7E-4 for EFEC with PRBS31 and OTU2 frame |
Chromatic Dispersion Penalty@ 1300 ps/nm |
|
|
| 3 | dB |
|
*Maximum chromatic dispersion for SFP-10G-ZR and SFP-10G-ZR-S is 1600 ps/nm.
Note: Parameters are specified over temperature and at end of life unless otherwise noted. When shorter distances of single-mode fiber are used (<40km), an inline optical attenuator must be used to avoid overloading and damaging the receiver.
Table 5. SFP-10G-ZR-I optical parameters
Parameter | Symbol | Minimum | Typical | Maximum | Units | Notes and Conditions |
Transmitter |
Transmitter wavelength |
| 1530 |
| 1565 | nm |
|
Side-mode suppression ratio | SMSR | 30 |
|
| dB |
|
Transmitter extinction ratio |
| 9 |
|
| dB |
|
Transmitter optical output power | Pout | 0 |
| 4.0 | dBm | Average power coupled into single-mode fiber |
Receiver |
Receiver optical input wavelength |
| 1260 |
| 1565 | nm | Receiver Sensitivity specified over 1530-1565nm only, with 3dB degradation permitted from 1260-1530nm |
Receiver damage threshold |
| +5 |
|
| dBm |
|
Receiver Overload |
| -7 |
|
| dBm |
|
Receiver performance at 10GE LAN and 10GE WAN rates, non-FEC application |
Receiver sensitivity |
| -24 |
|
| dBm | At BER=1E-12 with PRBS31 and 10GE frame |
Chromatic Dispersion Penalty@ 1400 ps/nm* |
|
|
| 3 | dB |
|
Receiver performance at OTU2/OTU2e rates, FEC application |
Receiver sensitivity |
| -27 |
|
| dBm | At Pre-FEC BER=1E-5 for GFEC and Pre-FEC BER=7E-4 for EFEC with PRBS31 and OTU2 frame |
Chromatic Dispersion Penalty@ 1300 ps/nm |
|
|
| 3 | dB |
|
*Maximum chromatic dispersion for SFP-10G-ZR-I is 1400 ps/nm.
Note: Parameters are specified over temperature and at end of life unless otherwise noted. When shorter distances of single-mode fiber are used (<40km), an inline optical attenuator must be used to avoid overloading and damaging the receiver.
Table 7 describes the bail latch color code for each type of optical SFP+ module.
Table 6. SFP+ optical modules color code
Product | Bail Latch Color |
SFP-10G-T-X | Golden/Yellow |
SFP-10G-SR-S SFP-10G-SR SFP-10G-SR-X SFP-10G-SR-I | Beige |
SFP-10G-LRM | Orange |
FET-10G | Brown |
SFP-10G-LR-S SFP-10G-LR SFP-10G-LR-X SFP-10G-LR10-I | Blue |
SFP-10G-BXD-I SFP-10G-BXU-I | Blue |
SFP-10G-ER-S SFP-10G-ER SFP-10G-ER-I | Red |
SFP-10G-BX40D-I SFP-10G-BX40U-I | Red |
SFP-10G-ZR-S SFP-10G-ZR SFP-10G-ZR-I | Green |
SFP-H10GB-CU1M | Beige |
SFP-H10GB-CU1-5M | Black |
SFP-H10GB-CU2M | Brown |
SFP-H10GB-CU2-5M | Yellow |
SFP-H10GB-CU3M | Orange |
SFP-H10GB-CU4M | Green |
SFP-H10GB-CU5M | Gray |
SFP-H10GB-ACU7M | Blue |
SFP-H10GB-ACU10M | Red |
SFP-10G-AOC1M | Beige |
SFP-10G-AOC2M | Brown |
SFP-10G-AOC3M | Orange |
SFP-10G-AOC5M | Gray |
SFP-10G-AOC7M | Blue |
SFP-10G-AOC10M | Red |
Table 7 provides the maximum power consumption and operating temperature range ratings per SFP+ module.
Table 7. SFP+ modules power consumption
Product | Power Consumption (W) | Operating Temperature Range |
SFP-10G-T-X | 2.5W | EXT |
SFP-10G-SR-S SFP-10G-SR | 1 | COM |
SFP-10G-SR-I | 1 | IND |
SFP-10G-SR-X | 1 | EXT |
SFP-10G-LRM | 1 | COM |
FET-10G | 1 | COM |
SFP-10G-LR-S SFP-10G-LR | 1 | COM |
SFP-10G-LR-X | 1 | EXT |
SFP-10G-LR10-I | 1 | IND |
SFP-10G-BXD-I SFP-10G-BXU-I | 1 | IND |
SFP-10G-ER-S SFP-10G-ER | 1.5 | COM |
SFP-10G-ER-I | 1.5 | IND |
SFP-10G-BX40D-I SFP-10G-BX40U-I | 1.2 | IND |
SFP-10G-ZR-S SFP-10G-ZR | 1.5 | COM |
SFP-10G-ZR-I | 2 | IND* |
SFP-H10GB-CU1M | 0.1 | COM |
SFP-H10GB-CU1-5M | 0.1 | COM |
SFP-H10GB-CU2M | 0.1 | COM |
SFP-H10GB-CU2-5M | 0.1 | COM |
SFP-H10GB-CU3M | 0.1 | COM |
SFP-H10GB-CU4M | 0.1 | COM |
SFP-H10GB-CU5M | 0.1 | COM |
SFP-H10GB-ACU7M | 1 | COM |
SFP-H10GB-ACU10M | 1 | COM |
SFP-10G-AOC1M | 1 | COM |
SFP-10G-AOC2M | 1 | COM |
SFP-10G-AOC3M | 1 | COM |
SFP-10G-AOC5M | 1 | COM |
SFP-10G-AOC7M | 1 | COM |
SFP-10G-AOC10M | 1 | COM |
*The SFP-10G-ZR-I has a cold start at -40 ⁰ C, the transceiver will be operational except optical traffic is not supported from -40 ⁰ C to -28 ⁰ C, all other low speed features (DOM, I2C, etc.) are operational. The module is fully operational -28 ⁰ C to 85 ⁰ C.